Nowadays, many drillers are assembled by hand work. This process is to determine the locations of the drill holes, marking the hole points, drilling the pilot hole with a fine-tipped drill, and expanding the hole to a diameter of 16 mm. These processes take 5-6 min on average with human power
With Delmatik, you only need to bring the machine to the appropriate position via the wheels and start the start button
At the same time, when you save so much from the speed, you can reduce the application mistakes. If the hole is not deep enough to reach the diameter of 16 mm, it is necessary to repeat the erection of the hole and cause a time loss of up to 20 minutes.